Don't Be A Pirate
My Blinkies
Add Me On Facebook
Protected
Blogs I Stalk
Awards :-)
Find Me At
Favorite Stamps
Sunday, May 8, 2011
♥The Enchanted Forest PTU♥
1:28 PM | 
Created By
DitzyDezigns |
Here is what we will be making :
**This tutorial was written & posted on 5/8/2011**
**Any resemblance to any other tutorial is purely coincidental & unintentional!!**
(To see this tag in its original size please click on it, as it is much clearer & beautiful colors :-)
Supplies Needed :
Paint Shop Pro X2 (Any version should work)
Scrapkit - The Enchanted Forest By Zaza @ Butterfly Blush
Font :
HomeRun Script
Size: 90 Pixels
Color: #f3869a
Mask Of Choice
Lets Begin :
Start by opening a new 800 X 650 transparent canvas (Don't worry we will crop it later)
Now open Frame 3, copy & paste it as a new layer onto your canvas ,then re-size it to 50%.
Now activate your magic wand by clicking on it, then click the canvas on the INSIDE of your frame.
Now go to Selections, click Modify, then from the slide out menu click Expand, set your number of pixels to 2 and click Ok.
Now go to Layers, and click New Raster Layer.
Now open Paper 5, copy & paste it INTO SELECTION.
In your layers pallet, move your Paper5 layer below your frame layer.
Now go to Selections and click Select None.
Now apply a drop shadow.
Now open your Swing, copy & paste it as a new layer onto your canvas ,then re-size it to 30%, Using your move tool position your Swing in the middle of your frame.
Go to Adjust, click Sharpness then click Sharpen.
Apply a drop shadow.
Now open your Cookie2, copy & paste it as a new layer onto your canvas ,then go to Image and click Mirror. Now re-size it to 45%. Use your move tool and position your Cookie2 to the lower right corner of your frame.
In your layers pallet, right click on your Cookie2 layer, and click Duplicate, then go to Adjust, click Blur, then click Gaussian Blur, set to 3.00 and click Ok.
Now change your blend mode to Overlay.
Now in your layers pallet click on your bottom tube layer (which would be your original tube) and apply a drop shadow to that layer.
Now open your Mushroom House, copy & paste it as a new layer onto your canvas ,then re-size it to 35%, then re-size it again to 80%. Now using your move tool , position your Mushroom House to the lower left corner of your frame.
Adjust, Sharpness then click Sharpen.
Now apply a drop shadow.
Now open your Ivy, copy & paste it as a new layer onto your canvas ,then re-size it to 40%. Use your move tool and position it in front of your frame.
Sharpen & apply a drop shadow.
Now open your Cookie1 , copy & paste it as a new layer onto your canvas ,then re-size it to 65%. Using your move tool position it to the left side of your tag. Now in your layers pallet, right click on your Cookie1 layer, then click Duplicate. Now go to Adjust, click Blur, then click Gaussian Blur, set to 3.00 and click Ok.
Now change your Blend Mode to Overlay.
Still in your layers pallet, click on your bottom tube layer, (original tube) and apply a drop shadow.
Now open your Bee element, copy & paste it as a new layer onto your canvas ,then re-size it to 40%. Using your move tool position it to the left side of your Cookie1 element.
Sharpen & apply a drop shadow.
Now open your Flowers2 element, copy & paste it as a new layer onto your canvas, go to Image, and click Flip ,then re-size it to 40%. Position your Flowers2 element to the top left corner of your frame.
Now in your layers pallet right click on your Flowers2 layer and click Duplicate. Then go to Image and click Mirror. Adjust your duplicated Flowers2 element to the upper right corner if you need to.
Sharpen & apply a drop shadow to BOTH of your Flower2 elements.
Now open your Bug1 element, copy & paste it as a new layer onto your canvas ,then re-size it to 40%. Go to Image and click Free Rotate, set to Right , 30.00 and click Ok. Now position it to where you would like it.
Sharpen & apply a drop shadow.
Now open Mushroom1, copy & paste it as a new layer onto your canvas ,then re-size it to 35%. Now position it behind your cookie 2. You will have to go to your layers pallet and move your Mushroom1 layer below your Cookie2 layer.
Now open your Mushroom2, copy & paste it as a new layer onto your canvas ,then re-size it to 35%. Go to Image and click Mirror. Now position it also behind your Cookie1 element. Again go to your layers pallet and move your Mushroom2 layer down below your Cookie1 layer.
Now go to your layers pallet, right click on your Mushroom2 layer, click Merge then click Merge Down. (You want to merge your Mushroom1 & Mushroom2 together.) Now go to Adjust, click Sharpness then click Sharpen. & Apply a drop shadow.
Now still in your layer pallet, right click on your Merged Mushroom layer, and click Duplicate. Now use your move tool and position your Duplicated Mushrooms to the left behind cookie1. In your layers pallet you may have to move both of your merged mushroom layers below your cookie layers. (If you haven't done that already)
Now open your Butterfly2 element, copy & paste it as a new layer onto your canvas ,then re-size it to 30%. Now position your Butterfly2 where you would like it.
Go to Image and click Free Rotate, set to Left , 30.00 and click Ok.
Now position it again if needed.
Sharpen & apply a drop shadow.
Now open your Dove element, copy & paste it as a new layer onto your canvas ,then re-size it to 30%. Position it on the right hand of your Cookie1 element. (So it looks like the dove is resting on her hand)
Now sharpen & apply a drop shadow to your dove.
Now in your layers pallet, click on your Paper 5 layer, then open your Rainbow element, copy & paste it as a new layer onto your canvas ,now re-size it to 50%. Position it so that it is on the inside of your frame towards the top , then go to Adjust, click Sharpness then click Sharpen. (See my tag for reference if needed)
Now click on the last layer in your layers pallet,
Open Paper 2, copy & paste it as a new layer onto your canvas ,then go to Layers, and click Load/Save Mask, then from the slide out menu click Load Mask From Disk. Then choose the mask you would like to use, and click Load.
Now go to your layers pallet and right click on your mask layer, then click Merge, then from slide out menu click Merge Group.
Now click on your top layer in your layers pallet.
Open your Ribbon2 element, copy & paste it as a new layer onto your canvas ,then re-size it to 50%. Now go to Image and click Free Rotate, set to Right, 90.00 and click Ok.
Now position it at the bottom of your tag.
Sharpen & apply a drop shadow.
Now open your Pot element, copy & paste it as a new layer onto your canvas ,then re-size it to 30%. Position it in front of your kneeling fairy (Cookie2) .
Sharpen & apply a drop shadow.
Now open Flowers3, copy & paste it as a new layer onto your canvas ,then re-size it to 50%. Now position your Flowers3 element so that it is behind your Mushrooms on the right side of your tag. In your layers pallet move your Flowers3 layer down so it is just below your right side Mushrooms layer.
Sharpen & apply a drop shadow.
Now it is time to add the name you would like on your tag.
The font I used again is
HomeRun Script
Size : 90 Pixels
Color: #f3869a
Once you have your name the way you like it and placed where you want it, go to your layers pallet, right click on your name layer and click Convert To Raster Layer.
Now go to Effects, click Plugins then chose your Eye Candy 4 - Gradient Glow.
You can either use my settings below or your own.
Now click Ok.
Then apply a drop shadow to your name.
Once you have done that, click your Magic Wand tool.
Now click inside each letter of your name. (You may only have to click the first letter and it will select all the letters, this depends on the font you used and if the letters are all connected.)
Once all letters are selected go to Effects, click 3D Effects and then click Inner Bevel. Again you can use my settings below, or use your own.
Click Ok.
Then go to Adjust, click Add/Remove Noise, then click Add Noise, set to Uniform, 30 and make sure your Monochrome box IS checked then click Ok.
Now go to Selections and click Select None.
Now add any & all copyright & credit information.
Once you have everything added and positioned the way you want it, go to your layers pallet and right click on any layer and then click Merge, then from the slide out menu click Merge Visible.
Now activate your crop tool and crop off any access canvas that we did not use.
Now you may want to re-size your tag, so go to Image and click Re-size - My settings below are just my personal preference, but it will give you a general idea of what to do.
Now go to Adjust, click Sharpness then click Sharpen.
All thats left is to save your tag as PNG & your DONE!!
Thanks for trying my tutorial, I would love to see what you have made using this or any of my tutorials. Please send me an email with a copy of what you have made, I would love to display it on my blog for others to enjoy.
Email : aditzymemory@yahoo.com
((HUGS))
Ditzy♥
Labels:
Subscribe to:
Post Comments (Atom)
About Me
- DitzyDezigns
- New York, United States
- Hiya Everyone! My name is Ronney, I have 3 wonderful teenagers, and have been married to my husband for 20 years. I LOVE to design signatures, tags & avatars, I design with PSP, and have been designing for over 2 1/2 years. I will be not only designing signatures, tags & avatars but will also be writing & posting tutorials as well. I will also be making some templates to share with you all as well. So I hope you enjoy and can use everything I have available on my blog :-) If you ever try any of my tutorials,please send me your completed designs and I would love to showcase it here on my blog!
♥I CT For♥
Blog Hop
Today's Date
Favorite Stores
♥Forums♥
My Pixels
♥My Avatars♥
0 comments:
Post a Comment