Don't Be A Pirate
My Blinkies
Add Me On Facebook
Protected
Blogs I Stalk
Awards :-)
Find Me At
Favorite Stamps
Wednesday, May 18, 2011
♥EMOlution PTU♥
6:24 PM | 
Created By
DitzyDezigns |
Here is what we are going to be making :
**This tutorial was posted by DitzyDezigns on May 18th 2011**
***Any resemblance to any other tutorial is purely coincidental & completely unintentional!!***
Supplies Needed:
Paint Shop Pro X2 (Any version should work)
Tube of choice : I used the amazing work of Lady Mishka , @ SATC
Scrapkit : I used the awesome work of Tami @ Addictive Pleasures
Template 84 (EMOlution) Also by Tami @ Addictive Pleasures (make sure that you leave her some luv when you download it :-)
Elements Used :
(The elements are not listed in any specific order, however if you would like to open them all at one time, click on the one element you want to open, then before you click on another element press & hold your Ctrl key on your keyboard, then continue to click on the rest of your needed elements,& they will all open :-)
Diamonds
Ribbon
Sparkles
RibbonandBow2
Lips
Button2
Feather
Pin
Shoes
Skull
Bow3
LongRibbonandBow
P10
P5
P4
P2
Lets Begin :
Open your Template 84, click on the copyright layer, then delete it from the layers pallet.
Now still in your layers pallet click on Raster 8, go to Selections, click Select all, then go to Selections again & click Float, then Selections again & click Defloat.
Now open Paper10, copy & paste it as a new layer onto your canvas ,then go to Selections & click Invert. Now on your keyboard press your Delete key 1 time.
Now go back to Selections & click Select None.
Now this next step is optional, Go to Effects, click Plugins, then click Eye Candy 5 - Impact - Gradient Glow. You can use my settings below or your own, makes no difference its all about how you want YOUR tag to be :-)
Click Ok.
Now apply a drop shadow to your new layer. Go to Effects, click 3D Effects, then click Drop Shadow. Below are my settings, again these settings are just my preference, you may use them or your own.
Click Ok.
Go to your layers pallet & delete the original Raster 8 layer.
Now in your layers pallet, click on Raster 5 layer, go to Selections, Select all, float, then defloat.(Remember all these are under the Selections option, do one after the other.)
Now open Paper 5, copy & paste it as a new layer onto your canvas ,then go to Selections & click Invert, then on your keyboard press your Delete key 1 time.
Now go to Selections & click Select None.
Apply your Gradient Glow like we did above, & also apply a drop shadow.
Go back to your layers pallet & delete your original Raster 5 layer.
In your layers pallet, click On Raster 9 layer, go to Selections, click Select all, then Float, then Defloat.
Now open Paper 4, copy & paste it as a new layer onto your canvas ,then go to Selections & click Invert. Now on your keyboard press your Delete key 1 time.
Go back to Selections & click Select None.
Apply your Gradient Glow & drop shadow.
Go back to your layers pallet & delete the original Raster 9 layer.
Now follow the exact same steps for the "copy of raster 9" layer that you did for the original raster 9 layer.
Now click on Raster 10 & apply a Gradient Glow & drop shadow.
Click on the "Copy Of Raster 10" layer , apply Gradient Glow & drop shadow as well.
Now in your layers pallet, click on your Raster 7 layer, go to Selections, Select all, then Float, then Defloat.
Now open Paper 2, copy & paste it as a new layer onto your canvas .Now go to Selections & click Invert, then on your keyboard press your delete key 1 time.
Selections then click Select None.
Now apply your Gradient Glow & drop shadow.
Go back to layers pallet & delete your original Raster 7 layer.
Still in your layers pallet, click on your "Copy Of Raster 7" layer & follow the exact same steps you did for the original Raster 7 layer.
Now on the following layers all I did was add a drop shadow in this order.
Apply drop shadow to Raster 11 layer
Apply drop shadow to Raster 18 layer
Apply a drop shadow to Raster 4 layer
Apply a drop shadow to Raster 2 layer
Apply a drop shadow to Raster 16 layer
Apply a drop shadow to Raster 3 layer
Apply a drop shadow to Raster 15 layer
Apply a drop shadow to Raster 1 layer
Apply a drop shadow to Raster 17 layer
Now for these next layers I applied Noise.
So for the layers below go to Adjust, click Add/Remove Noise, set to Uniform, 40 & make sure the monochrome box IS checked.
Raster 3 layer
Raster 11 layer
Raster 4 layer
Raster 2 layer
Raster 1 layer
Now open your tube of choice :
Now click on Raster 12 layer, go to Selections, Select All, then Float, & Defloat.
Now copy & paste your tube as a new layer onto your canvas ,re-size to desired size, & position within the circle. Go to Selections, click Invert, Now on your keyboard press your delete key 1 time.
Go back to Selections & click Select None.
Now at the top of your layers pallet, lower the opacity of your tube layer to around 68. (Sometimes its hard to get it right where you want it lol)
Now go to your layers pallet & click on the very top layer in your layers pallet.
Copy & paste your full tube as a new layer onto your canvas ,then re-size it to 70% (This size will depend on the tube you are using, so you might have to adjust your size to fit your tube)
Now using your move tool, position your tube to the middle of your tag.
In your layers pallet, move your tube layer down so it is directly below your Raster 1 layer . (You want your tube below all of your wordart layers.)
Now activate your eraser tool, & erase any parts of your tube that are below your pink "Emolution" wordart.
Now go to your layers pallet, right click on your tube layer, then click duplicate. Then go to Adjust, click Blur, then from the slide out menu click Gaussian Blur, set to 5.00 & click Ok.
Now go to the top in your layers pallet & change the Blend Mode to Overlay.
Click on your original tube layer in your layers pallet, & apply a drop shadow.
Click on your Raster 6 layer in your layers pallet, go to Selections, click Select All, then Float, then Defloat.
Copy & paste your tube again as a new layer onto your canvas ,this time position it so that a different part of the tube is visible within the circle. Once you are happy go to Selections & click Invert, then on your keyboard press your delete key 1 time.
Now Selections, & click Select None.
Now lower the opacity of this tube layer to around 71.
Click on your Raster 2 layer again & apply a drop shadow.
Lets start adding some elements :-)
Click on your top layer in your layers pallet,
Now open your Diamond element & crop it so that only the 4th diamond down is visible. Now copy & paste it as a new layer onto your canvas ,then position it using your move tool to where you would like it. Go to your layers pallet, right click on your Diamond layer, then click Duplicate. Use your move tool to position your duplicated Diamond to your liking. Continue to duplicate your Diamond layer until your are happy with how ever many you have.
Now open your Longribbonandbow element, copy & paste it as a new layer onto your canvas ,then re-size it to 65%. Using your move tool position it to the top left side of your tag. Then go to Adjust, click Sharpness, then click Sharpen. Now apply a drop shadow.
Now in your layers pallet, right click on your longribbonandbow layer & click Duplicate. Then go to Image & click mirror. Position to the right side of your tag.
Open bow3 element, copy & paste it as a new layer onto your canvas ,then re-size it to 40%. Using your move tool position it to where you would like it.
Sharpen & apply a drop shadow.
Open your Skull2 element, copy & paste it as a new layer onto your canvas ,then re-size it to 40%.Position where you would like it.
Sharpen & apply a drop shadow.
Now in your layers pallet, duplicate your Skull2 layer a couple of times & position them around your tag.
Open your Shoes element, copy & paste it as a new layer onto your canvas ,then re-size it to 35%.Position to your liking.
Sharpen & apply a drop shadow.
Open your Ribbon element, copy & paste it as a new layer, position to your liking. Sharpen & apply a drop shadow.
Open your Pin element, copy & paste it as a new layer onto your canvas ,then re-size it to 65%. Then go to Image, click Free Rotate, then set it to Left, 30.00 click Ok.Now position it to the left side of your tag.Sharpen & apply a drop shadow.
In your layers pallet, right click on your Pin layer, then click Duplicate. Now go to Image & click Mirror. Use your move tool to adjust the position of your duplicated Pin element.
Open your Feather element, copy & paste it as a new layer onto your canvas ,then position by your full tube. Then in your layers pallet, move your feather layer down so that it is under both of your full tube layers.
Now right click on your feather layer, click Duplicate, then go to Image & click Mirror. Adjust the position of your duplicated feather if needed.
Now right click on your duplicated feather layer, click Merge, then click Merge Down from the slide out menu. Now sharpen & apply a drop shadow to your merged feather layer.
Open your Button2 element, copy & paste it as a new layer onto your canvas ,then re-size it to 40%. Position to your liking. Then go to your layers pallet & right click on your Button2 layer, then click Duplicate, go to Image & click Mirror. Position your duplicated Button2 element to your liking, I duplicated my button 2 layer one additional time (for a total of 3), and positioned it towards the bottom of my tag.
Now open your Lips element,copy & paste it as a new layer onto your canvas ,then re-size it to 40%. Now position using your move tool. Sharpen & apply a drop shadow.
Go to your layers pallet & right click on your Lips layer & click Duplicate. Now go to Image & click Mirror. Position your duplicated Lips element using your move tool to where you would like it.
Now open your RibbonBow2 element, copy & paste it as a new layer onto your canvas ,then re-size it to 40%. Position your ribbon where you would like it. Now sharpen & apply a drop shadow.
Then in your layers pallet, right click on your RibbonBow2 layer, click Duplicate. Then go to Image & click Mirror. Adjust the position of your duplicated RibbonBow2 element using your move tool if you need to.
Now open your Sparkles element, copy & paste it as a new layer onto your canvas ,then use your move tool & move your Sparkles to the bottom of your tag. Now go to your layers pallet, & right click on your Sparkles layer, then click Duplicate, then go to Image & click Flip. Now duplicate your Sparkles layer again, this time use your move tool & move your 3rd sparkles element to the middle of your tag. (Trying not to cover a lot of your tubes face.)
Now activate your text tool, type out the name that you want to be on your tag.
Font I used :
P22 Da Vinci Forward
Size : 150 Pixels
Color : Black (#000000)
Once you have placed your name where you would like it, go to your layers pallet & right click on your name layer,then click Convert To Raster Layer. Now go to Effects, click Plugins, then click Eye Candy 5 - Impact, then Gradient Glow. These settings below are the same ones I used above, but you are welcome to change them to whatever you would like. Remember its about what you like as a designer :-)
Click Ok.
Now apply a drop shadow. Again the settings below are the same we used above, but you can change them if you would like :-)
Click Ok.
Add all of your copyright & credit information.
Once you have everything on your tag that you need on there, go to your layers pallet, & right click on any layer, then click Merge, then from the slide out menu click on Merge Visible.
Now activate your crop tool & crop off any access canvas that we did not use. (Which isn't much on this one lol)
Now once you crop your tag you may or may not want to re-size it , depending on where you are going to be using it. If you do need to re-size it, go to Image & click Re-size, set your settings & click Ok.
Now once I re-size my completed tag I like to Sharpen it one final time, this is completely option & just my preference, but if you would like to the option is there :-) Go to Adjust, click Sharpness, then click Sharpen.
Now all that is left is to save your tag as PNG & you have completed this tutorial!!
((HUGS))
Ditzy♥
Labels:
Subscribe to:
Post Comments (Atom)
About Me
- DitzyDezigns
- New York, United States
- Hiya Everyone! My name is Ronney, I have 3 wonderful teenagers, and have been married to my husband for 20 years. I LOVE to design signatures, tags & avatars, I design with PSP, and have been designing for over 2 1/2 years. I will be not only designing signatures, tags & avatars but will also be writing & posting tutorials as well. I will also be making some templates to share with you all as well. So I hope you enjoy and can use everything I have available on my blog :-) If you ever try any of my tutorials,please send me your completed designs and I would love to showcase it here on my blog!
♥I CT For♥
Blog Hop
Today's Date
Favorite Stores
♥Forums♥
My Pixels
♥My Avatars♥
0 comments:
Post a Comment