Don't Be A Pirate
My Blinkies
Add Me On Facebook
Protected
Blogs I Stalk
Awards :-)
Find Me At
Favorite Stamps
Sunday, June 5, 2011
♥Congrats Class 2011 PTU♥
1:32 PM | 
Created By
DitzyDezigns |
**This tutorial was written & posted on June 6th 2011**
***Any resemblance to any other tutorial is purely coincidental & completely unintentional!!***
Supplies Needed :
Paint Shop Pro X2 (Any version should work)
Scrapkit - Class 2011 By Tammy's Scraps
Template60 - By Sapphy'z Demented Hallucinationz
Plugins Used :
Eye Candy 5 Impact - Gradient Glow (Optional)
Eye Candy 5 Impact - Glass (Optional)
Elements Used :
(These are not listed in any specific order, however if you would like to open them all at one time click on your first element you want to open, then before you click open, press & hold your Ctrl key & click every element you want to put on your tag. Now click Open, then each element will open one right after the other. That way you don't have to keep going to your folder & opening them one at a time. :-)
Lets Begin :
Open your Template60 -
In your layers pallet, delete the credit, pixewords,wordart by Sapphy & Misfits Party Girl layers.
Now go to Image, click Canvas Size, now set it to 800 X 650
In your layers pallet, click on your black rectangle layer, go to Selections, click Select All, go to Selections again & click float, then click Selections again & click Defloat -
(From here down with those steps need to be done, I will just put "Selections - Select All- Float - Defloat-"
Then you will know that you have to go to Selections each time to click on those commands.)
Now open Paper 1, copy & paste as a new layer onto your template canvas , go to Selections click Invert , now on your keyboard press your delete key 1 time.
Go to Selections again & click Select None.
Now in your layers pallet, delete your original black rectangle layer.
Go to Effects, click 3D Effects, then click Drop Shadow.
You can use my settings below or your own , then choice is yours :
Click Ok.
Now in your layers pallet, click on your Frame Background layer. Got o Selections - Select All - Float - Defloat -
Open Paper 12, copy & paste it as a new layer onto your template canvas, then go to Selections - Click Invert, then on your keyboard press your delete key 1 time.
Go to Selections & click Select None.
In layers pallet, delete your original Frame Background layer.
Apply a drop shadow (Same settings as before)
In your layers pallet, click on your Frame layer, go to Selections - Select All - Float - Defloat -
Open Paper 16, copy & paste it as a new layer onto your template canvas ,then go to Selections & click Invert, then on your keyboard press your delete key 1 time.
Go to Selections & click Select None.
Now in your layers pallet, delete your original Frame layer .
Apply a drop shadow. (Same settings as before)
In your layers pallet, click on your Red Circle layer, then go to Selections - Select All - Float - Defloat -
Open Paper 6, copy & paste it as a new layer onto your template canvas, go to Selections & click Invert, now on your keyboard press your delete key 1 time.
Go to Selections & click Select None.
In your layers pallet delete your original Red Circle layer.
Apply a drop shadow to your new red circle. Use the same settings as before.
In your layers pallet, click on your Black Circle layer, Go to Selections - Select All - Float - Defloat -
Open Paper 2, copy & paste it as a new layer onto your template canvas, go to Selections, click Invert. On your keyboard press your delete key 1 time.
Now go to Selections & click Select None.
Then in your layers pallet, delete your original Red Circle layer.
Now lets add some elements :
Open Element 63 - Copy & paste it as a new layer onto your canvas, then re-size it to 40%. (On your keyboard press your Shift & s key to bring up your re-size menu, then set it to percent, and change your number to what you need it for :-)
Using your move tool position your Element 63 to the top of your circle on your template. (You can use my tag for reference if you need to.)
Now go to Adjust, click Sharpness, then click Sharpen. (Now from here down when you need to sharpen something I will just put "Sharpen")
Apply a drop shadow.
Open Element 64 - Copy & paste it as a new layer onto your template canvas , re-size it to 30%, then using your move tool position your Element 64 to the bottom of the circle on your template.
Sharpen & apply a drop shadow.
Open Element 42 - Copy & paste it as a new layer onto your template , now re-size it to 30%. Using your move tool position it to the left upper corner of your template.
Sharpen your element 42.
In your layers pallet, right click on your Element 42 layer, then click Duplicate. Now use your move tool & position your duplicated element 42 to the right upper corner of your template.
Now go to Effects, click Plugins , then click Eye Candy 5 Impact - Then click Gradient Glow from the slide out menu. Apply the settings below or your own.
1st color I used is : #ffffff
2nd color I used is : #f9f160
Click Ok.
Apply the gradient glow to your left sided Element 42 as well.
Now apply a drop shadow to both of your Element 42.
Open Element 10 - Copy & paste it as a new layer onto your template canvas, then re-size it to 25%. Using your move tool position your Element 10 to the top left corner near your Element 42.
Sharpen & apply a drop shadow.
Open Element 12 - Copy & paste it as a new layer onto your template canvas ,then re-size it to 25%.
Using your move tool position it to the top right corner near your Element 42.
Sharpen & apply a drop shadow.
Open Element 34 - Copy & paste it as a new layer onto your template canvas, then re-size it to 30%. Using your move tool position your Element 34 to the lower right corner of your template.
Sharpen & apply a drop shadow.
Open Element 32 - Copy & paste it as a new layer onto your template canvas ,then re-size it to 30%. Position your element 32 to the lower left corner of your template.
Sharpen & apply a drop shadow.
Open Element 14 - Copy & paste it as a new layer onto your template canvas, then re-size it to 20%. Then re-size it again to 70%. Now use your move tool & move your Element 14 to between the legs of your Element 32 on the left.
Sharpen & apply a drop shadow.
Open Element 13 - Copy & paste it as a new layer onto your template canvas ,then re-size it to 20% then re-size it again to 70%. Now position your Element 13 to the lower right corner between the legs of your Element 34.
Sharpen & apply a drop shadow.
Open Element 95 - Copy & paste it as a new layer onto your template canvas, now re-size it to 30%. Now position your Element 95 between the legs of your bear on the left side.
Sharpen & apply a drop shadow.
Go to your layers pallet, move your Element 95 layer down below your Element 13 & Element 14 layers.
Now still in your layers pallet, right click on your Element 95 layer & click Duplicate. Now use your move tool & position your duplicated Element 95 to the right side of your template, & position like you did for your original Element 95.
Open Element 5 - Copy & paste it as a new layer onto your canvas, then re-size it to 20%. Then re-size it again to 30%.
Go to Image & click Free Rotate, set to Left 20.00 & click Ok.
Now position your Element 5 above your Bear element.
Sharpen & apply a drop shadow.
Go to your layers pallet & right click on your Element 5 layer & click Duplicate.
Now use your move tool to move your duplicated Element 5 to the right side of your template. (Use my tag for reference if you need too)
Open your Element 7 - Copy & paste it as a new layer onto your template canvas ,then re-size it to 25%. Now position this balloon next to your yellow balloon on the left side.
Sharpen & apply a drop shadow.
Go to your layers pallet & right click on your Element 7 layer, then click Duplicate. Now use your move tool & move your duplicated balloon to the right side & place it next to your yellow balloon.
Open Element 3 - Copy & paste it as a new layer onto your template canvas, then re-size it to 30%.
Now go to Image & click Free Rotate set to Right 20.00 & click Ok.
Now position your balloon to the left of your blue balloon on the left side of your template.
Sharpen & apply a drop shadow.
Go to your layers pallet, right click on your Element 3 layer, then click Duplicate. Now use your move tool to move your duplicated balloon to the right side of your template , then place it to the right of your blue balloon.
Open Element 63 again - Copy & Paste it as a new layer onto your template canvas, then re-size it to 20%. Position your Element 63 to the left & place it on the strings of your balloons.
Sharpen & apply a drop shadow.
Open Element 64 - Copy & paste it as a new layer onto your template canvas, then re-size it to 20%. Position your Element 64 to the right side of your template & place it on the strings of your balloons.
Sharpen & apply a drop shadow.
Open Element 79 - Copy & paste it as a new layer onto your template canvas, then re-size it to 10%. Now using your move tool, position your element 78 to the lower right side of your template. Place it in front of your present & gift pale that is in between your bears legs. (See my tag if needed)
Sharpen & apply a drop shadow.
Open Element 80 - Copy & paste it as a new layer onto your template canvas, then re-size it to 10%. Position it next to your black rose that is on the right side of your template.
Sharpen & apply a drop shadow.
Open Element 81 - Copy & paste it as a new layer onto your template canvas ,then re-size it to 10%. Now position it to the same area as the other two roses only this time place it on the other side of your black rose.
Sharpen & apply a drop shadow.
(So now your roses should be blue, black & yellow )
Go to your layers pallet, right click on your Element 81 layer, then click Merge, then from the slide out menu click Merge Down.
Now continue to merge down until your Elements 79,80 & 81 layers become 1 layer.
Then right click on your merged roses layer, & click Duplicate.
Now go to Image & click Mirror.
Now it is time to add a phrase or name to your tag, so activate your text tool :
Set your font, size & color.
Font I used is -
2 Moulin Rouge DNA
Size : 60 Pixels
Color : #000000 (Black)
Now click Apply, now position your first word in your phrase or name whatever you chose to use in the center of your circle on your template.
Now go to your layers pallet, right click on your phrase/name layer, then click Convert To Raster Layer.
Then go to Effects, click Plugins then click Eye Candy 5 Impact , then from the slide out menu click Gradient Glow . You can use my settings below or your own.
1st color I used is : #ffffff (White)
2nd color I used is : #000000 (Black)
Click Ok.
Now apply a drop shadow to your word/name.
Then activate your magic wand, click inside each letter in the word/name that you used, then once all the letters have been selected , go to Effects, click Plugins, then click Eye Candy 5 Impact , then from the slide out menu click Glass. You can use my settings or your own :
Click Ok.
Now apply a drop shadow to that word/name.
Now follow the same steps to finish out your phrase if you choose to use more than one word like I did. If you just want your name on the tag then you can move on, but if you want to use the phrase I used or one of your own, you must follow the same steps to complete all of the words. :-)
Once you have your name or phrase completed,
Activate your text tool again & add your copyright/credit information.
Position where you want it.
Now if you have everything on your tag & where you want it, go to your layers pallet & right click on any layer.
Click Merge then on the slide out menu click Merge Visible.
Now activate your crop tool, then crop off any access canvas that we did not use. Being careful not to crop to close to your template, elements, or texts.
If you do make a mistake just click your undo button until you are back to where you were before you began to crop your tag.
Once your tag is cropped you will want to re-size your tag. This size will depend on where you are going to be using your tag.
Now ones your tag is re-sized go to Adjust, click Sharpness then click Sharpen.
All that's left to do is to save your tag as PNG & you have completed this tutorial!!
Labels:
Subscribe to:
Post Comments (Atom)
About Me
- DitzyDezigns
- New York, United States
- Hiya Everyone! My name is Ronney, I have 3 wonderful teenagers, and have been married to my husband for 20 years. I LOVE to design signatures, tags & avatars, I design with PSP, and have been designing for over 2 1/2 years. I will be not only designing signatures, tags & avatars but will also be writing & posting tutorials as well. I will also be making some templates to share with you all as well. So I hope you enjoy and can use everything I have available on my blog :-) If you ever try any of my tutorials,please send me your completed designs and I would love to showcase it here on my blog!
♥I CT For♥
Blog Hop
Today's Date
Favorite Stores
♥Forums♥
My Pixels
♥My Avatars♥
0 comments:
Post a Comment