PaintShop Pro X2 (Any version should work)

Scrapkit Bunny Hop By Rieka_Rafita @ Scraps With Atittude

Mask Of Choice

Font : AL Sandra Size : 48 Color : Black (#000000)

Eye Candy 4 > Gradient Glow

Xero > Fritillary

Paper 6 & Paper 7

Frame 3

Bunny 1 , Bunny 3 & Bunny 4

Heart 1

Flower 3

Bow 3 & Bow 4

Egg 1,2 & 4

EggSurprise 1

Flower 4

Lets Begin :

Open a new 800x650 transparent image.

Now open Frame 3, copy & paste as a new layer onto your canvas, then re-size it to 70%.

Then go to Image, click Free Rotate, set it to Right 90.00 & click Ok.

Now in your layers pallet make sure you are on your Frame 3 layer, then using your magic wand tool click inside the left & right openings in the frame. Go to Selections, click Modify, then click Expand, set your Number Of Pixels to 5 & click Ok.

Open Paper 7 , copy & paste it onto your canvas as a new layer, then go to Selections, click Invert, then on your keyboard press your Delete key 1 time.

Now also on your keyboard press your Ctrl & D keys to deselect. OR You can go to Selections & click Select None to deselect as well.

Now in your layers pallet, move your paper layer down so that it is directly below your frame. (To move a layer, just left click and hold the layer you want to move, and move it down or up which ever you need to do then when you have it where you want it just let go of your left button on your mouse :-)

Now lets open Bunny 3, copy & paste it as a new layer onto your canvas, then lets re-size it to 60%. Using your move tool, position your Bunny 3 element to the right side of your frame.

In your layers pallet, right click on your Bunny 3 layer, then click Duplicate, then still in your layers pallet move your duplicated Bunny 3 layer below your frame layer but keep it above your paper layer.

Now get your eraser tool, and making sure that in your layers pallet you have selected your top  Bunny 3 layer, and erase the bottom part of the tube that is going over the end of the frame. Erase it enough so that it looks like your bottom half of your bunny is inside your frame. (You may also have to highlight your bottom bunny layer as well and erase the same parts you erased on your top layer as well)

Now apply a drop shadow to the bottom bunny layer. (To apply a drop shadow go to Effects, click 3D, then click Add Drop Shadow) Set your settings the way you would like them, then click Ok.

Now lets open Bunny 4, copy & paste it as a new layer onto your canvas, then re-size it to 60%. Use your move tool and position your Bunny 4 to the left side of your frame.

In your layers pallet right click on your Bunny 4 layer, and then click Duplicate, now move your duplicated layer below your frame layer, but make sure you keep it above your paper layer.

Now go back up and click on your top layer, then get your eraser tool and erase the bottom part of the tube that is going over the end of the frame. (Just like we did in the step above for Bunny 3) Erase it enough so that it looks like your bottom half of your bunny 4 is inside the frame. (Again you will have to also highlight your bottom bunny 4 layer and erase the same parts you erased on your top bunny 4 layer)

Now apply your drop shadow using the same steps as above.(Effect > 3D > Drop Shadow)

Open Bow 4, copy & paste as a new layer onto your canvas, now re-size it to 30%. Now in your layers pallet, move your Bow 4 layer down so that it is directly above your frame layer. Now use your move tool and position your Bow 4 in the middle of your frame. Then apply a drop shadow.

Now open your Bunny 1 element, copy & paste it as a new layer, then re-size it to 40%. Using your move tool position your Bunny 1 element towards the bottom of your frame and center it between the to openings. (See my tag as reference if you need to)

Now go to Adjust, click Sharpness, then click Sharpen. 

Apply a drop shadow.

Now open your Flower 4 element,  copy & paste , it as a new layer, then re-size it to 50% and using your move tool position your Flower 4 element to the left of your frame. Go to your layers pallet and right click on your Flower 4 layer, then click Duplicate. Now go to Image, and click Mirror.

Now go to Adjust, click Sharpness, then click Sharpen.

Apply a drop shadow.

Lets open our EggSurprise 1 element, copy & paste it as a new layer, then re-size it to 20%, using your move tool again position your Egg Surprise 1 element to the lower left corner of your frame.

Go to Adjust, click Sharpness, then click Sharpen.

Apply a drop shadow.

Now in your layers pallet, right click on your EggSurprise 1 layer, click Duplicate . Now go to Image, then click Mirror. Using your move tool if needed position your duplicated EggSurprise 1 element to where you want it.

Now open Egg 2, copy & paste as a new layer onto your canvas , then re-size it to 15%. Using your move tool and position it to the bottom left corner of your frame, next to your EggSurprise1 element.

In your layers pallet, right click on your top Egg element layer, then click Merge, then from the slide out menu click Merge down. 

Now on your Merged egg layer go to Adjust, click Sharpness, then click Sharpen.

Apply a drop shadow.

Now open your Egg 4 element, copy & paste it as a new layer onto your canvas, then re-size it to 15%. Left click and hold on your Egg 4 element and drag this layer below your Bunny 1 layer.

Now in your layers pallet right click on your Egg 4 layer and click Duplicate , then go to Image & click Mirror. Use your move tool if needed to position your duplicated Egg 4 element so that it is next to your Egg 2 layer.

Now right click on your duplicated Egg 4 layer, then click Merge, then on the slide out menu click Merge Down. Then go to Adjust, click Sharpness, then click Sharpen.

Now apply a drop shadow to your merged layer.

Open your Bow 3 element, copy & paste as a new layer onto your canvas, then re-size it to 70%. Using your move tool and position your Bow 3 element so that it is on the upper right corner of your frame.

In your layers pallet move your Bow 3 layer down so that it is directly above your frame layer.

Apply a drop shadow.

Now open your Flower 3 layer, copy & paste it as a new layer onto your canvas, then re-size it to 60%. Using your move tool again position your Flower 3 element so that it is on  the bottom left of your frame.

Now in your layers pallet, move your Flower 3 layer down so it is directly above your frame layer.

Now right click on your  Flower 3 layer, click Duplicate, then go to Image, and click Mirror.

Apply a drop shadow.

Open your Heart 1 element, copy & paste as a new layer, then re-size it to 20%.

Use your move tool and position your Heart 1 element to the left side above your frame. 

In your layers pallet right click on your Heart 1 layer, and click Duplicate. Use your move tool and position your duplicated Heart 1 layer where you would like it.

Duplicate your Heart 1 layer several times and use your move tool to position them where you would like them. Scatter them all around your tag.

In your layers pallet, click on the very last layer, 

Now open Paper 6, copy & paste it as a new layer onto your canvas, now go to Layers, click Load/Save Mask, then click Load Mask From Disc. Now select a mask of your choice.

Once you have your mask the way you want it, go to your layers pallet and right click on your mask layer, then click Merge, then from the slide out menu click Merge Group.

Now on your merged mask layer go to Effects, then go to your Plug-ins, then find Xero, and click on Fritillary. Use the following settings : (Or settings of your chosing)

Granularity 6

Agression 33

Tesselation 33

Variation 50

Now click Ok.

Now you can add the name you would like on your tag.

Once you have your name on your tag , go to your layers pallet, right click on your name layer, then click Convert To Raster Layer. Then go to Effects, click on Plug-ins, then find your Eye Candy 4 and click on Gradient Glow from the slide out menu. Set your settings as you would like & click ok.

Then go to Effects, click 3D then click Drop Shadow, then click Ok.

Add your copyright/credit information.

Once you have all that added you will want to crop your tag. So get your crop tool, and crop off the area around your design removing any empty canvas space. Be careful not to crop to close to your design, as you don't want to lose any of your design.

Once you have your tag cropped, right click on any layer in your layers pallet, then click Merge, on the slide out menu click Merge Visible.

Now you may want to re-size your tag depending on where you are going to use it. To re-size your tag you can use your Shift & S keys on your keyboard, and your re-size menu will open and you can set your settings and click Ok. OR You can go to Image, and click Re-size and your re-size menu will open and you can set your settings that way as well.

Now save as png & your all done!!

As always I would LOVE to see what you have made using my tutorials, so please send me an email with your design included, and I would be honored to display it on my blog :-)