Don't Be A Pirate
My Blinkies
Add Me On Facebook
Protected
Blogs I Stalk
Awards :-)
Find Me At
Favorite Stamps
Wednesday, October 5, 2011
♥Let It Be Captured PTU♥
3:38 PM | 
Created By
DitzyDezigns |
**This tutorial was written & posted by Ditzy Dezigns on October 5th 2011**
***Any resemblance to any other tutorial is purely coincidental & completely unintentional!!!***
Here is what we will be making :
Supplies Needed :
Paint Shop Pro X2 (Any version should work)
Scrapkit - Let It Be Captured By Wicked Creationz @ Scrappin Dollars
Mask Of Choice
Plugins Used :
Eye Candy 4 Gradient Glow (Optional)
Alien Skin Xenofex 2 - Constellation (Optional)
Font Used :
Saginaw
Elements Used :
PP6
PP5
Frame 2
Element32
Element13
Element35
Element37
Element45
Element16
Element36
Element30
Element27
Element10
Element18
Element19
Element4
Element14
Element39
Lets Begin :
Start by opening a new 800 X 600 transparent canvas. (Don't worry you will crop it at the end of the tutorial - this just gives you more room to work with .)
Now open Frame 2 - Copy & paste it as a new layer onto your canvas- then re-size it to 50%. Use your move tool & position it in the center of your canvas.
Now click on your Magic Wand - then click inside your frame 2 element. Then go to Selections - click Modify - then set to 10 & click Ok.
Now open PP6 - Copy & paste it as a new layer onto your canvas - then go to Selections- click Invert - then on your keyboard press your Delete key 1 time.
Now go back to Selections & click Select None.
Now go to your layers pallet - move your PP6 layer down so that it is directly under your Frame2 layer.
Then click on your Frame 2 layer - go to Adjust - click Sharpness - then click Sharpen.
Now go to Effects - 3D Effects - then click Drop Shadow
Click Ok
Now open Element 32 - Copy & paste it as a new layer onto your canvas - then re-size it to 65%. Position it to the center of your frame.
Go to your layers pallet & move your Element32 layer down so it is under your Frame 2 layer but keep it above your PP6 layer.
Now go to Adjust - Sharpness - Sharpen
Then apply a drop shadow to your Element 32 as well. (Use same settings as above)
Open Element13 - Copy & paste it as a new layer onto your canvas - then re-size it to 35%. Position it to the lower left side of your Frame2.
Sharpen & apply a drop shadow.
Open Element35 - Copy & paste it as a new layer onto your canvas - then position it to the right side of your frame.
Sharpen & apply a drop shadow.
Open Element37 - Copy & paste it as a new layer onto your canvas - then re-size it to 35%. Now position it to the left side.
Sharpen & apply a drop shadow.
Then go to your layers pallet - right click on your Element37 layer then click Duplicate. Now go to Image & click Mirror. Then go back to your layers pallet - right click on your duplicated Element37 layer - then click Duplicate. Now use your move tool to position it to your liking.
Open Element40 - Copy & paste it as a new layer onto your canvas - then re-size it to 50%. Position it to the center of your frame at the bottom.
Sharpen & apply a drop shadow.
Open Element 16 - Copy & paste it as a new layer onto your canvas - then re-size it to 30%. Position it to your liking.
Sharpen & apply a drop shadow.
Open Element36 - Copy & paste it as a new layer onto your canvas - then re-size it to 80%. Position it to your liking.
Sharpen & apply a drop shadow.
Open Element30 - Copy & paste it as a new layer onto your canvas - then re-size it to 25%. Now go to Image - Free Rotate, set it to Right 20.00 & click Ok.
Now position it to the left side.
Sharpen & apply a drop shadow.
Go to your layers pallet & duplicate this layer 2 times, position each one to your liking.
Open Element27 - Copy & paste it as a new layer onto your canvas - then re-size it to 80% 3 times. Now position it inside your Frame2 .
Go to your layers pallet - move your Element27 layer down so it is under your Frame2 layer but keeping it above your PP6 layer.
Sharpen.
Open Element 10 - Copy & paste it a s a new layer onto your canvas - then re-size it to 30%. Then re-size it again to 50%. Now go to Image - Free Rotate set it to Right 50.00 & click Ok.
Now position it to your liking.
Sharpen & apply a drop shadow.
Go to your layers pallet- move your Element 10 layer down below your PP6 layer.
Open Element18 - Copy & paste it as a new layer onto your canvas - then re-size it to 30% then again to 50%. Then go to Image - Free Rotate set it to Right 30.00 & click Ok.
Sharpen & apply a drop shadow.
Go to your layers pallet -Right click on your Layer 18 - then click Merge - then click Merge Down. You want to merge layers 18 & 10.
Now right click on your Merged layer - then click Duplicate. Then go to Image & click Flip.
Move both layers down in your layer pallet so they are under your PP6 layer.
Open Element 19 - Copy & paste it as a new layer - then re-size it to 30%. Go to Image - click Free Rotate - set it to Left 30.00 & click Ok. Now position it to the left side of your frame.
Sharpen & apply drop shadow.
Go to your layers pallet - right click on your Element 19 layer - then click Duplicate - then go to Image & click Mirror.
Now right click on your Element 19 layer - click Arrange - Send To Bottom.
Do the same for your duplicate Element 19 layer.
Open Element 4 - Copy & paste it as a new layer onto your canvas - then re-size it to 30%. Position it to your liking.
Sharpen & apply drop shadow.
Open Element 14 - Copy & paste it as a new layer onto your canvas - then re-size it to 30%. Position to your liking.
Sharpen & apply a drop shadow.
Then go to your layers pallet - right click on your Element 14 layer - then click Duplicate. Now position to your liking.
Open PP5 - Copy & paste it as a new layer onto your canvas - then re-size it to 75%.
Now go to your layers pallet - right click on your PP5 layer then click Arrange - Send To Bottom.
Now still on your PP5 layer - go to Layers - Load/Save Mask - Load Mask From Disk. Now chose a Mask of your choice & click Load.
Now in your layers pallet - right click on your mask layer - then click Merge - Merge Group.
Now right click on your merged mask layer - then click Duplicate. Now right click on your duplicate mask layer - click Merge - Merge Down. Now your mask should appear a bit darker.
Now add your name & any copyright/credit information.
For the name I used :
Font : Saginaw
Size : 50 Pixels
Background Color : #d46b1b
Foreground Color : Set to nul
Once you have applied & positioned your name - go to your layers pallet - then right click on your name layer - then click Convert To Raster Layer.
Now go to Effects - Plugins - Eye Candy 4000 - Gradient Glow
(You can use my settings below or your own)
Then click Ok.
Now apply a drop shadow.
Once you have everything where you would like it - go to your layers pallet - right click on any layer - then click Merge - then click Merge Visible.
Now activate your Crop tool - Crop off any access canvas that you did not use.
Now you may want to re-size your tag depending on where you will be using it. If you re-size your tag be sure to give it one final Sharpen.
Now all that is left is to save it as a PNG file & you have completed this tutorial!!♥
Labels:
Subscribe to:
Post Comments (Atom)
About Me
- DitzyDezigns
- New York, United States
- Hiya Everyone! My name is Ronney, I have 3 wonderful teenagers, and have been married to my husband for 20 years. I LOVE to design signatures, tags & avatars, I design with PSP, and have been designing for over 2 1/2 years. I will be not only designing signatures, tags & avatars but will also be writing & posting tutorials as well. I will also be making some templates to share with you all as well. So I hope you enjoy and can use everything I have available on my blog :-) If you ever try any of my tutorials,please send me your completed designs and I would love to showcase it here on my blog!
♥I CT For♥
Blog Hop
Today's Date
Favorite Stores
♥Forums♥
My Pixels
♥My Avatars♥
0 comments:
Post a Comment