Don't Be A Pirate

Photobucket

My Blinkies

Photobucket

♥Ditzy's TOU♥

All of the tutorials written by me are of my own Ditzy imagination. Do NOT copy or alter them in ANY way. Do NOT copy & paste the tutorials to any website, forum or group. Do NOT claim them as your own. If you would like to show or share my tutorial do so by using a link to bring your members to my blog. However if you do please send me a courtesy email so that I know my tutorials are being used according to my TOU. Also if you would please send me a link to where you will be posting my link. If you have done any of my tutorials I would LOVE to see the outcome of what you have made, so please email me OR you can leave me a link in my shout box so that I can see what you have made and display it on my blog for others to enjoy as well. Other than that please have fun,and I hope that you enjoy all my tutorials! Email me @ DitzyDezigns@hotmail.com

Email Me

I would love to see what you have made using any of my tutorials, so please feel free to email me at the address below. DitzyDezigns@hotmail.com

Protected

Photobucket myfreecopyright.com registered & protected Photobucket

Blogs I Stalk

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Pages

Powered by Blogger.

Awards :-)

Photobucket Photobucket Photobucket

Find Me At

Photobucket

Favorite Stamps

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket
Monday, October 17, 2011

♥Bubble Bubble PTU♥

**This tutorial was written & posted by Ditzy Dezigns on October 17th 2011**
***Any resemblance to any other tutorial is purely coincidental & completely unintentional!!***

Here is what we will be making :

Supplies Needed :
Paint Shop Pro X2 (Any version should work)
Scrapkit - Bubble Bubble By  Creative Intentionz  @ Twilight Scraps
Mask Of Choice

Plugins Used :
Eye Candy 5 Impact - Gradient Glow (Optional)

Font Used :
Saginaw

Elements Used :
Paper 7
Paper 11
House
Moon
Mummy
Ghost
Lightray
Vine Flowers 1
Pumpkin
Legs
Witch
Vampbat
Bow 4

Lets Begin :

Start by opening a new 800 X 600 Transparent canvas. (Don't worry you will crop it at the end of the tutorial, this just gives you more space to work with.)

Now open your White Frame of choice - Copy & paste it as a new layer onto your canvas - I then re-sized mine to 65%.  Then use your move tool to position your frame in the center of your canvas. (If you use a different frame than what I have you will need to adjust your size accordingly.)

Now activate your Magic Wand tool - then click inside your white frame - go to Selections - click Modify - then on the slide out menu click Expand. Set the Number Of Pixels to 10 & Click Ok.

Now make a new raster layer - 
Now open Paper 1 - Copy & paste it INTO SELECTIONS. 
Then go back to Selections - click Select None.

In your layers pallet - move your Paper 1 layer down so it is directly under your White Frame layer.

Now click on your White Frame layer - go to Adjust - click Sharpness - then click Sharpen.
Now go to Effects - click 3D Effects - then click Drop Shadow.
**You are welcome to use my settings below - or you can play around with the settings and get the effect that you like best.**


Now click Ok.

Now lets start adding some elements -

Open your House element - Copy & Paste it as a new layer onto your canvas - then re-size it to 50%. Position your house element using your move tool inside your White Frame.
Then go to your layers pallet - move your House layer down so it is directly below your White Frame layer. Be sure to keep it above your Paper 1 layer.

Now activate your Eraser Tool - then erase any part of the house that sticks out of the frame.
Then go to Adjust - click Sharpness - then click Sharpen
Effects - 3D Effects - Drop Shadow. (Use the same settings as you did above.)

Open your Moon element - Copy & paste it as a new layer onto your canvas - then re-size it to 20%. Now use your move tool & position your Moon element to the top left corner inside your White Frame.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Drop Shadow (same settings)

Open your Mummy element - Copy & paste it as a new layer onto your canvas - then re-size it to 45%. Now go to Image - click Mirror. Now use your move tool & position your Mummy element to the left side of your frame.
Then go to Adjust - Sharpness - Sharpen
Effects 3D Effects - Inner Bevel
**You can use my settings or your own**

Click Ok.

Now go back to Effects - click 3D Effects - Drop Shadow
Same settings as above.

Open your Ghost element - Copy & Paste it as a new layer onto your canvas - then re-size it to 30% then re-size it again to 70%. Use your move tool & position your Ghost element to the left side of your frame.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Inner Bevel (Same settings as before)
Effects - 3D Effects - Drop Shadow (same settings as before)

Open your Pumpkin element - Copy & paste it as a new layer onto your canvas - then re-size it to 25%. Use your move tool to position your Pumpkin to the right side of your House element in your White Frame.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Inner Bevel (Same settings)
Effects - 3D Effects - Drop Shadow (Same settings)

Open your Legs element - Copy & paste it as a new layer onto your canvas - then re-size it to 25%. Now use your move tool to position your Legs element to the inside of your White Frame, place them on top of your Pumpkin element. 
Go to your layers pallet - move your Legs layer down so it is directly under your Pumpkin layer.

Adjust - Sharpness - Sharpen
Effects - 3D Effects - Inner Bevel (Same settings as before)
Effects -  3D Effects - Drop Shadow (Same settings as before)

Open your Witch element - Copy & paste it as a new layer onto your canvas - then re-size it to 35%. Use your move tool to position your Witch element to the right side of your White Frame.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Inner Bevel (same settings)
Effects - 3D Effects - Drop Shadow (same settings)

Open your Vampbat element - Copy & paste it as a new layer onto your canvas - then re-size it to 30%. Use your move tool to position your bat so it is above your upper left corner of your White Frame.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Inner Bevel
Effects - 3D Effects - Drop Shadow

Open your Lightray  element - Copy & paste it as a new layer onto your canvas - then re-size it to 30%. Use your move tool to position your Lightray element to the upper left corner of the inside of your White Frame.
Go to your layers pallet - move your Lightray layer down so it is directly under your Moon layer.
Adjust - Sharpness - Sharpen

Open your Bow 4 element - Copy & paste it as a new layer onto your canvas - then re-size it to 20%. Use your move tool & position your Bow4 element to the upper right corner of your frame.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Inner Bevel (same settings)
Effects - 3D Effects - Drop Shadow (same settings)

Now go to your layers pallet - right click on your Bow 4 layer - then click Duplicate. Now go to Image & click Mirror. Use your Move tool to adjust the position of your duplicated Bow 4 element so that it is on the upper left corner of your white frame.

Open your Vine Flowers 1 element - Copy & paste as a new layer onto your canvas - then re-size it to 40%. Use your move tool & position your Vine Flowers 1 element to the upper left corner of your White Frame.
Go to your layers pallet - right click on your Vine Flowers 1 layer - then click Arrange - now click Send To Bottom.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Drop Shadow (same settings)
Do not apply inner bevel to this element.

Now back in your layers pallet - right click on your Vine Flowers 1 layer - then click Duplicate. Go to Image & click Mirror. Then use your move tool to position your duplicated Vine Flowers 1 element to the upper right corner of your White Frame.

Now open Paper 11 - Copy & paste it as a new layer onto your canvas - then re-size it to 70%. Now go to your layers pallet - right click on your Paper 11 layer - click Arrange - then click Send To Bottom.

Then go to Layers - click Load Save Mask - then click Load Mask From Disk.
Once your Mask menu opens, choose a Mask of your choice then click Load.

Now go to your layers pallet - right click on your Mask layer - then click Merge - then click Merge Group.
Now position your Mask so that it is on the left side of your tag. Then back to your layers pallet - right click on your Merged Mask layer - then click Duplicate. Now go to Image & click Mirror. Use your move tool to adjust the position of your duplicated Mask layer if needed.

Now add your name & any copyright/credit information needed.

The settings I used for the name are :

Font : Saginaw
Size : 40 Pixels (Depends on the length of your name)
Background Color : #000000
Foreground Color : Set to nul

(I used the exact same settings for my phrase "Happy Hallowen" except I changed the size from 40 pixels to 35 Pixels)

Now apply & position your name - (follow these same steps for your Happy Halloween phrase) Then go to your layers pallet - right click on your Name layer - then click Convert To Raster Layer.
Then go to Effects - Plugins - Eye Candy 5 Impact - Gradient Glow
Then click Ok.

Now go to Effects - 3D Effects - Drop Shadow (Use the same settings you have used through-out the tutorial)

Now if you are happy with all of your elements & your name - go to your layers pallet -right click on any layer then click Merge - then click Merge Visible.

Now activate your Crop tool & crop off any access canvas that you did not use.

Once you have your tag cropped you may or may not need to re-size your tag, depending on where you will be using it.
If you re-size your completed tag be sure to Sharpen it one final time.

Then all that is left is to save your tag as a PNG file & you have completed this tutorial!!♥

0 comments:

About Me

My Photo
DitzyDezigns
New York, United States
Hiya Everyone! My name is Ronney, I have 3 wonderful teenagers, and have been married to my husband for 20 years. I LOVE to design signatures, tags & avatars, I design with PSP, and have been designing for over 2 1/2 years. I will be not only designing signatures, tags & avatars but will also be writing & posting tutorials as well. I will also be making some templates to share with you all as well. So I hope you enjoy and can use everything I have available on my blog :-) If you ever try any of my tutorials,please send me your completed designs and I would love to showcase it here on my blog!
View my complete profile

♥I CT For♥

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Blog Hop

avatar

♥Chat W/Me ♥

Today's Date

Favorite Stores

Photobucket

♥Forums♥

Photobucket Photobucket Photobucket Photobucket

My Pixels

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

My Time :-)

Yes I LUV My Pixels :-)

Followers

♥My Avatars♥

Some of these were made for me, others I made myself, so plz DO NOT TAKE them!! Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket