Don't Be A Pirate

Photobucket

My Blinkies

Photobucket

♥Ditzy's TOU♥

All of the tutorials written by me are of my own Ditzy imagination. Do NOT copy or alter them in ANY way. Do NOT copy & paste the tutorials to any website, forum or group. Do NOT claim them as your own. If you would like to show or share my tutorial do so by using a link to bring your members to my blog. However if you do please send me a courtesy email so that I know my tutorials are being used according to my TOU. Also if you would please send me a link to where you will be posting my link. If you have done any of my tutorials I would LOVE to see the outcome of what you have made, so please email me OR you can leave me a link in my shout box so that I can see what you have made and display it on my blog for others to enjoy as well. Other than that please have fun,and I hope that you enjoy all my tutorials! Email me @ DitzyDezigns@hotmail.com

Email Me

I would love to see what you have made using any of my tutorials, so please feel free to email me at the address below. DitzyDezigns@hotmail.com

Protected

Photobucket myfreecopyright.com registered & protected Photobucket

Blogs I Stalk

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Pages

Powered by Blogger.

Awards :-)

Photobucket Photobucket Photobucket

Find Me At

Photobucket

Favorite Stamps

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket
Sunday, September 4, 2011

♥100% Addicted (Animated) PTU♥

**This tutorial was written & posted by DitzyDezigns on September 4th 2011**
***Any resemblance to any other tutorial is purely coincidental & completely unintentional!!***

Here is what we will be making :


Supplies Needed :
Paint Shop ProX2 (Any version should work)
Animation Shop
Tube Of Choice - I used the amazing work of Jose Cano . You can purchase his work @ PTE
Scrapkit - Addicted By Tamie @ Addictive Pleasures
Template 3 By Addictive Pleasures Only Available @ Addictive Pleasures Forum 
Animation Of Choice - I used one of Missy's from Divine Intentionz (Look to the right side & click on Animations. There is a ton there to choose from :-)

Plugins Used :
Eye Candy 4000 - Gradient Glow (Optional)
Eye Candy 5 Impact - Gradient Glow (Optional)
Eye Candy 5 Impact - Glass (Optional)


Elements Used :
Text
Text2
P10
P5
P9
P4
Sticker
Stars2
Stars
String2
Ribbonbow
Star2
Starbeads
Flames
Button2
Diamonds
Bomb
Bow5
Beads2
Beads
Wire
Sparkle

Font Used :
Sick Capital Vice

Lets Begin :

Open your Template 3 - go to Image - click Canvas Size - set it to 800 X 700
Now go to your layers pallet - delete the Credit & Background Layer.

In your layers pallet - click on your Raster 1 - go to Selections - click Select All - go back to Selections - click Float - then Selections again & click Defloat - (These steps will be used on most of the layers in the template.)
Now open P4  from your kit - Copy & paste it as a new layer onto your canvas - go to Selections - click Invert - then press your Delete key (on your keyboard) 1 time.
Go back to Selections & click Select None.

Now go to Effects - click Plugins - Eye Candy 5 Impact - Gradient Glow
**You are welcome to use my settings below or your own - the choice is always yours!**


Click Ok.

Now go to Effects - 3D Effects - Drop Shadow
**Again you are welcome to use my settings - or your own**


Click Ok.

Now go to your layers pallet - delete your original Raster 1 layer.

Now follow all of those same steps for the following layers - the only thing that will change each layer is what paper you use for each layer.

I will list the paper I used for each layer -
Raster 11 Layer - Paper 10

Raster 4 Layer - Paper 5

Raster 9 Layer - Paper 9

Raster 2 Layer - Paper 4

Now click on Raster 5 layer - then activate your Magic Wand tool - then click inside to select that layer on your canvas. 
Make a new raster layer -
Activate your Flood Fill tool - set your Foreground Color to #000000 (Black) now flood fill your Raster 5 layer.
Keeping this layer selected - open your tube of choice - Copy & paste your close up tube. Use your move tool to position your close up tube to your liking. Once you are happy with it go to Selections - click Invert - then on your keyboard press your delete key 1 time.
Go to Selections & click Select None.

Now on your close up tube layer - go to Effects - click Plugins - Vanderlee - Unplugged
Now when your menu opens at the top right of it, scroll down the list til you see "Interlace" click on it to activate it.

Then set your settings like mine below :


Then click Ok.

Go to your layers pallet - delete your original Raster 5 layer.

Now follow those exact same steps for your Copy Of Raster 5 layer.

Now click on Raster 6 layer & apply a drop shadow

Then click on your Copy Of Raster 6 layer & apply a drop shadow.

Now open your tube of choice again - Copy & paste your Full tube and position it using your move tool to the center of your template.

In your layers pallet - move your full tube layer down below your Raster 10 layer.

Now right click on your Full Tube layer - click Duplicate.

On your duplicated tube layer change your Blend Mode to  Soft Light

Then on your original full tube layer (the bottom one) apply a drop shadow.


Click Ok.

Now in your layers pallet - delete your Raster 7 & Raster 9 layers.

Now click on your Raster 10 layer - activate your Magic Wand tool again -
Now click inside each number/symbol -
Make a new raster layer - set your Foreground Color to #f05fb0
Now flood fill your selected area's.

Now go to Effects - Plugins - Eye Candy 5 Impact - Glass
**My settings are below but you are welcome to use your own, its up to you**


Click Ok.

Now go to Adjust - click Add/Remove Noise - Add Noise
Set to Uniform , 40 & monochrome box is checked , then click Ok.

Now go to Selections & click Select None.

Now go to Effects - click Plugins - Eye Candy 5 Impact - Gradient Glow (same settings as before)

Click Ok.
Now apply a drop shadow. (Same settings as before)

Go to your layers pallet - delete your original Raster 10 layer.

Now follow these exact same steps for your Raster 8 layer.

This time alternate colors , when you flood filling. 
The colors I alternated with are :
#f05fb0
#000000 (Black)

Then once all of your template layers are the way I want them - start adding some elements from the kit.

Open your Text element - Copy & paste it as a new layer onto your canvas - then re-size it to 80%. Use your move tool & position your Text element to the center of your template.

Go to Effects - click Plugins - Eye Candy 4000 - Gradient Glow
**You are welcome to use my settings below or your own**
*Please note - when you click on the color tag in your Eye Candy 4000 - Gradient Glow menu - you can set it to Fat - then the color #ffffff (white) or any setting of your choice.*

Click Ok.
Apply a drop shadow (same settings as above)

Now open your Text 2 element - Copy & paste it as a new layer onto your template - then re-size it to 80%. Now position your Text2 element towards the top of your template.

Apply the same Eye Candy 4000 - Gradient Glow effect that you used on your first Text element. 
Then apply a drop shadow.

Open your Wire element - Copy & paste it as a new layer onto your canvas - then position it center on your template.
Go to Adjust - Sharpness - Sharpen
Effects - 3D Effects - Drop Shadow (same settings as before)
Now go to your layers pallet & move your Wire layer down under your 2 small frame layers.
Open your Beads element - Copy & paste it as a new layer onto your canvas - then re-size it to 70%. Position it to the upper left corner of your template.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Drop Shadow

Open Beads 2 element - Copy & paste it as a new layer onto your template - re-size it to 70%. Now use your move tool to position your element to the upper right corner of your template.
Adjust - Sharpness - Sharpen
Apply a drop shadow (same settings)

Open Bow 5 element - Copy & paste it as a new layer onto your template - then re-size it to 40%. Now position it to the top of your Beads element on the left.
Adjust - Sharpness - Sharpen
Apply a drop shadow

Open your Bomb element - Copy & paste it as a new layer onto your template - then re-size it to 40%. 
Position it to your liking.
Adjust - Sharpness - Sharpen
Apply a drop shadow

Open your Diamonds element - Copy & paste it as a new layer onto your template - use your move tool to position them to the upper left of your template.
Go to your layers pallet - right click on your Diamonds layer - click Duplicate - then go to Image & click Mirror. (Use your move tool to adjust the position if needed)

Now go back to your layers pallet - right click on your duplicated Diamond layer again & click Duplicate. This time go to Image & click Flip.

Go back to your layers pallet - right click on your 2nd duplicated layer - then click Duplicate again, now go to Image & click Mirror.
(Adjust any of those elements using your move tool if needed)

Open your Button2 element - Copy & paste it as a new layer onto your canvas - then re-size it to 30%. Position it using your move tool to your liking.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Drop Shadow (same settings you have been using)

Open your Flames element - Copy & paste it as a new layer onto your template - then re-size it to 65%. Position your flames element to the right side of your full tube.
Adjust - Sharpness - Sharpen
Apply a drop shadow

Go to your layers pallet - move your Flames layer down so it is below both of your full tube layers.

Then right click on your Flame layer - click Duplicate. Now go to Image & click Mirror.
Adjust your position if needed.

Open your Starbeads - Copy & paste it as a new layer onto your template - then re-size it to 30%. Now position it to your liking.
Sharpen & apply a drop shadow
Go to your layers pallet - right click on your Starbeads - then click Duplicate -position your duplicated Starbead element to your liking. Now duplicate this layer again & position it to your liking.

Open your Star2 element - Copy & paste it as a new layer onto your canvas - then re-size it to 30%. Position it to your liking.
Sharpen & apply a drop shadow.
Then go to your layers pallet - right click on your Star2 layer - then click Duplicate.
Now use your move tool to position to your liking.

Open your Ribbonbow - Copy & paste it as a new layer onto your template. Now re-size it to 80%. Position it using your move tool to your liking.
Sharpen & apply a drop shadow.

Open your String2 element - Copy & paste it as a new layer onto your template - now re-size it to 80%. Position it using your move tool to your liking.
Sharpen & apply a drop shadow.

Open your Stars element - Copy & paste it as a new layer onto your template - use your move toolt o position your Stars element to your liking.
Sharpen & apply a drop shadow.

Open your Sticker element - Copy & paste it as a new layer onto your template - then re-size it to 30%. Position it to your liking.
Sharpen & apply a drop shadow.

Open your Sparkles element - Copy & paste it as a new layer onto your template - position them to the top of your template.
Then go to your layers pallet - right click on your Sparkles layer & click Duplicate.
Go to Image - click Flip.
Adjust the position if needed.

Now add your name . Set your Font, Size & Color.
I used :
Font : Sick Capital Vice
Size : 80 Pixels
Background Color : #000000 (Black)
Foreground Color : Set to nul

Apply your name. Then go to your layers pallet - right click on your name layer - then click Convert To Raster Layer.
Now go to Effects - click Plugins - Eye Candy 5 Impact - Gradient Glow


Click Ok.

Now apply a drop shadow to your name.

Now add your copyright & credit information. (Don't forget to add your license #)

Now activate your crop tool & crop off any access canvas you did not use.

Now open your Animation Shop -
Now open your animation of choice. Then click on the first frame in your animation - then on your keyboard use your Ctrl & A key to select ALL of the frames in your animation. (Take notice how many frames your animation has. You can do this quickly by looking at the lower right corner of your Animation Shop screen as it will tell you how many frames it has.)

Then go back to your PSP -

In your layers pallet - close off all of the layers from your bottom FULL TUBE layer up.

Then click on a layer that is below your closed off layers -
Edit - Copy Special - Copy Merged 

Now go to your Animation Shop -
Right click - click Paste As New Animation

Now while in animation shop, you will need to duplicate your tag frame to as many frames as your animation of choice has.
For my animation it has 12 frames - so I need to make my tag into 12 frames.
To do that, on your keyboard, press your Ctrl & L key until you have exactly 12 frames.

Now click on the first frame in your tag frames. Then use your Ctrl & A keys again to select ALL of your tag frames. (ALL frames of your tags & ALL frames of your animation MUST be selected in order for your animation to work correctly.

Now go to your animation frames - right click in the first frame - then click Copy

Now go to your tag frames - right click in the first frame - then click Paste - Into Selected Frame

Now move your mouse around on your tag WITHOUT clicking until you see a part of your animation visible on the end of your mouse arrow. Once you see that portion of your animation - move your mouse around until you have your animation where you want it to begin. Once you are happy with placement - then left click to place your animation.

I used the exact same animation twice on my tag. So if you wish to do the same - then right click again on your 1st tag frame - then click Paste - Into Selected Frame - now move your mouse around until you see your animation again - once you see it - move your mouse so that your animation is in a different location than your first one. I positioned mine across from my 1st animation.

Now view your animation to make sure it is the way you want it.
If your not happy with it, click your undo button and do it again. 
If you are happy with it, go back to your PSP -

Now in your layers pallet - open all of the layers you recently closed off. Then close off ALL of the layers that are below your bottom tube layer. 
Now click on one of those active layers -
Go to Edit - Copy Special - Copy Merged

Go to Animation Shop -

Right click in your grey work area - then click Paste as New Animation -

Now you will need to make the same amount of frames that the bottom part of your tag & animation have -
mine has 12 frames.

So use your Ctrl & L keys until your top tag frame has 12 frames.

Once you have 12 frames for your top part of your tag. You will need to select ALL 12 of those frames. Do this the same way you did it for your other frames. Ctrl & A keys.

Now back to your top tag frames - right click in the first frame - then click Copy
Now go to the frames that have the back half of your tag & animation already on them.

Right click in the 1st frame - then click Paste - Into Selected Frame.

Now once the top of your tag appears - make sure you line it up so that it is the same as it was in your PSP.
Once happy with placement - left click to place your tag .

Now view your animation again to make sure you have it the way you want it.
If you are unhappy with the placement of the top part of your tag - click your undo button in your animation shop & try it again.

If you are happy with your tag then all that is left is to re-size it & save it as a GIF file!!♥


0 comments:

About Me

My Photo
DitzyDezigns
New York, United States
Hiya Everyone! My name is Ronney, I have 3 wonderful teenagers, and have been married to my husband for 20 years. I LOVE to design signatures, tags & avatars, I design with PSP, and have been designing for over 2 1/2 years. I will be not only designing signatures, tags & avatars but will also be writing & posting tutorials as well. I will also be making some templates to share with you all as well. So I hope you enjoy and can use everything I have available on my blog :-) If you ever try any of my tutorials,please send me your completed designs and I would love to showcase it here on my blog!
View my complete profile

♥I CT For♥

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Blog Hop

avatar

♥Chat W/Me ♥

Today's Date

Favorite Stores

Photobucket

♥Forums♥

Photobucket Photobucket Photobucket Photobucket

My Pixels

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

My Time :-)

Yes I LUV My Pixels :-)

Followers

♥My Avatars♥

Some of these were made for me, others I made myself, so plz DO NOT TAKE them!! Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket