Don't Be A Pirate

Photobucket

My Blinkies

Photobucket

♥Ditzy's TOU♥

All of the tutorials written by me are of my own Ditzy imagination. Do NOT copy or alter them in ANY way. Do NOT copy & paste the tutorials to any website, forum or group. Do NOT claim them as your own. If you would like to show or share my tutorial do so by using a link to bring your members to my blog. However if you do please send me a courtesy email so that I know my tutorials are being used according to my TOU. Also if you would please send me a link to where you will be posting my link. If you have done any of my tutorials I would LOVE to see the outcome of what you have made, so please email me OR you can leave me a link in my shout box so that I can see what you have made and display it on my blog for others to enjoy as well. Other than that please have fun,and I hope that you enjoy all my tutorials! Email me @ DitzyDezigns@hotmail.com

Email Me

I would love to see what you have made using any of my tutorials, so please feel free to email me at the address below. DitzyDezigns@hotmail.com

Add Me On Facebook

Protected

Photobucket myfreecopyright.com registered & protected Photobucket

Blogs I Stalk

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Pages

Powered by Blogger.

Awards :-)

Photobucket Photobucket Photobucket

Find Me At

Photobucket

Favorite Stamps

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket
Thursday, October 27, 2011

♥Trick Or Treat PTU♥

**This tutorial was written & posted by Ditzy Dezigns on October 26th 2011**
***Any resemblance to any other tutorial is purely coincidental & completely unintentional!!***

Here is what we will be making :

Supplies Needed :
Paint Shop Pro X2 (Any version should work)
Tube Of Choice - I used Elias Chatzoudis @ PTE
(I purchased my tube when he was at MPT that is why my MPT # is on this tag)
Scrapkit - Trick Or Treat By Tamie @ Addictive Pleasures
Template - Temp 10 By Tamie @ Addictive Pleasures Templates

Plugins Used :
Eye Candy 4000 - Gradient Glow (Optional)
Eye Candy 5 Impact - Gradient Glow (Optional)
Xero - Fritillary (Optional)

Font Used :
KG Love You Through It

Elements Used :
P5
P10
P8
P9
P11
P2
Ribbon
Text 2
Boo
Reaper
Demon
Ghost Dog
Dangler
Bug
Bee
Ribbon Bow
Ribbon Bow 2
Ribbon 3
Skull
Sparkles

Lets Begin :

Start by opening your Temp110 - 
Go to Image - Canvas Size - set to 800 X 800 . (Don't worry you will crop & re-size at the end of the tutorial)

Now go to your layers pallet - delete the following layers :
Raster 1 (Credit layer)
Background

Now in your layers pallet - click on your Raster 7 layer - go to Selections - click Select All, then back to Selections - click Float - then back to Selections - click Defloat -

Open P11 - Copy & paste it as a new layer onto your canvas - then go to Selections - click Invert - now on your keyboard press your Delete key 1 time. Now go to Selections & click Select None.

Go to Effects - click Plugins - then click Eye Candy 5 Impact - then click Gradient Glow :
*You are welcome to use my settings below or your own, its up to you*


Then click Ok.

Now go to Effects - click 3D Effects - then click Drop Shadow :
*Again you can use my settings below or your own*

Then click Ok.

Now go back to your layers pallet & delete your original Raster 7 layer.

Now you will follow all of the same steps you followed for your Raster 7 layer for the following layers. I have added what paper I used for each layer.
Raster 10 - Use P10
Raster 8  - Use P8
Raster 4 - Use P9
Raster 5 - Use P11
Raster 6 - Use P2

Now in your layers pallet - click on your Raster 2 layer - go to Effects - click Plugins - then click Xero - then click Fritillary -

Then click Ok.

Now keeping this Raster 2 layer selected, open your tube of choice - Copy & paste it as a new layer - then using your Move tool - position your tube within the marching ants to your liking.
Then go to Selections - click Invert - then on your keyboard press your Delete key 1 time. Then go back to Selections - click Select None.

Now go to your layers pallet - click on Raster 3 layer - follow the same steps that you did for your Raster 2 layer.

Then click on your Raster 14 layer - go to Effects - click Plugins - Xero - click Fritillary - apply the same settings as you did for the other layers. Then click Ok.

Now in your layers pallet - click on your Raster 12 layer - go to Adjust - click Add/Remove Noise - then click Add Noise. Set to Uniform, 50 & make sure your Monochrome box IS checked, then click Ok.
Then go to Effects - click 3D Effects - then click Drop Shadow.
*Use the same settings you have been using through out the tutorial*

Then click Ok.

Now follow the same steps you just did for your Raster 12 layer for the following layers :
Raster 13
Raster 15

Now Copy & paste your main tube of choice - as a new layer onto your canvas - then position it to the center of your template.
Go to your layers pallet - move your full tube layer down so that it is directly below your Raster 9 layer.

Then on your full tube layer - right click, click Duplicate. Then go to Adjust - click Blur - then click Gaussian Blur, set it to 5.00 & click Ok.

Then go back to your layers pallet, at the top and change your Blend Mode from Normal - to Overlay.
Now click on your original full tube layer (the one on the bottom) and go to Effects - 3D Effects - Drop Shadow. (Same settings as before & click Ok)

Now click on your Raster 9 layer - go to Effects - Plugins - Xero - Fritillary - use the same settings as before, so you should only have to click Ok to apply it.

Now go to Effects - click Plugins - then click Eye Candy 5 Impact - Gradient Glow - Again you will be using the same settings as before, (which should now be saved) so just click Ok.

Then go to Effects - click 3D Effects - Drop Shadow (same settings, click Ok)

Now click on Raster 11 - go to Effects - 3D Effects - then click Inner Bevel -

Then click OK.

Now go to Effects - Plugins - Eye Candy 4000 - Gradient Glow -
***These settings are different than your Eye Candy 5 Gradient Glow settings, you are welcome to use mine, or play around with your settings to get the effect that you like.*** 
Before you click ok, make sure you click on the Color tab & set your colors as well.

Click Color Tab -

Now click Ok.

Then go to Effects - 3D Effects - Drop Shadow (Same settings, click Ok)

Now lets add some elements -

Open Text 2 element - Copy & paste it as a new layer onto your canvas - then using your Move Tool - position your Text 2 element to the center of your template.
Then go to Effects - Plugins - Eye Candy 4000 - Gradient Glow
(Use same settings as you just did above then click Ok.)
Now go to Effects - 3D Effects - Drop Shadow (same settings, click Ok)

Now in your layers pallet - Move your Text 2 layer down so it is directly under BOTH of your full tube layers. (The tube that is in the center of your canvas.)

Now open your Boo element - Copy & paste it as a new layer onto your canvas - then re-size it to 50%. Go to Image - click Free Rotate - set it to Left 30.00 & click Ok.
Now go to Effects - click Plugins - then click Eye Candy 4000 - Gradient Glow
*For this effect you will up the Glow Width (pixels) to 4.00.*Other than that everything is the same.

Now click Ok.

Using your Move tool position your Boo element to the top left corner of your template.
Go to Effects - click 3D Effects - Drop Shadow (same settings , click Ok)

Now open your Reaper element - Copy & Paste it as a new layer onto your canvas - then re-size it to 50%. Then re-size it again to 65%. Use your move tool to position it to your liking.
Go to Adjust - click Sharpness - then click Sharpen
Effects - 3D Effects - Drop Shadow (same settings, click Ok)

Open your Demon element - Copy & paste it as a new layer onto your canvas - then re-size it to 30%. Use your move tool & position your Demon element to your liking.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Drop Shadow (Same settings, click Ok)

Open your Ghost Dog element - Copy & paste it as a new layer onto your canvas - then re-size it to 30%. Use your Move tool & position your Ghost Dog element to your liking.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Drop Shadow (same settings, click Ok)

Open your Dangler element - Copy & paste it as a new layer onto your canvas - then re-size it to 35%. Using your move tool position your Dangler element to your liking.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Drop Shadow (same settings, click Ok

Open your Bug element - Copy & paste it as a new layer onto your canvas - then re-size it to 30%. Using your move tool, position your Bug element to your liking.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Drop Shadow (Same settings , click Ok )

Open your Bee element - Copy & paste it as a new layer onto your canvas - then re-size it to 30%. Using your move tool, position your Bee element to your liking.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Drop Shadow (same settings, click Ok)

Open your Ribbon element - Copy & paste it as a new layer onto your canvas, then using your Move Tool to position your Ribbon  to your liking.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Drop Shadow (same settings, click Ok)

Open your Ribbon Bow element - Copy & paste it as a new layer onto your canvas - then re-size it to 75%. Now using your move tool, position your Ribbon Bow element to the left side of your template.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Drop Shadow (same settings, click Ok)
Now go your layers pallet - right click on your Ribbon Bow layer - then click Duplicate.
 Now go to Image - click Mirror.

Now open your Ribbon Bow 2 element - Copy & paste it as a new layer onto your canvas - then re-size it to 75%. Now position it towards the center of your template. 
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Drop Shadow (same settings, click Ok)

In your layers pallet move your Ribbon Bow 2 layer down under both of your full tube layers.

Open your Ribbon 3 element - Copy & paste it as a new layer onto your canvas - then position it to your liking.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Drop Shadow (same settings, click Ok)

Open your Skull element - Copy & paste it as a new layer onto your canvas - then re-size it to 30%. Position it to your liking.
Adjust - Sharpness - Sharpen
Effects - 3D Effects - Drop Shadow (same settings, Click Ok)

Now go to your layers pallet - right click on your Skull layer - then click Duplicate. Now use your move tool to position your duplicated Skull element to your liking. Then go back to your layers pallet - & duplicate your Skull layer a couple more times, positioning each one around your tag to your liking.

Now open your Sparkles element - Copy & paste it as a new layer onto your canvas - then position it towards the bottom of your template.
Adjust - Sharpness - Sharpen
Do not apply a drop shadow to this element.

Go to your layers pallet - right click on your Sparkle layer - click Duplicate. Go to Image & click Flip. Use your Move Tool to adjust the position of your duplicated Sparkle element to the top of your template.

Now add your name & credit information.

For the name I used the following :

Font : KG Love You Through It
Size : 80 Pixels
Background Color : #8d3c82
Foreground Color : Set to nul

Now apply & position your name to your liking.
Go to your layers pallet - right click on your Name layer - then click Convert To Raster Layer.

Go to Effects - 3D Effects - Inner Bevel (Use the same settings as before )
Now go to Effects - click Plugins - Eye Candy 4000 - Gradient Glow


Then click Color Tab :


Then click Ok

Go to Effects - 3D Effects - Drop Shadow (same settings, click Ok)

Now if your happy with the placement of your elements & name, go to your layers pallet - right click on any layer - click Merge - then click Merge Visible.

Now activate your Crop tool - crop off any access canvas that you did not use.

Now you may or may not need to re-size your tag, depending on where you will be using it.

If you re-size your tag be sure to apply one last Sharpen to it.

Now all that is left is to save your tag as a PNG file & you have completed this tutorial!! ♥

0 comments:

About Me

My Photo
DitzyDezigns
New York, United States
Hiya Everyone! My name is Ronney, I have 3 wonderful teenagers, and have been married to my husband for 20 years. I LOVE to design signatures, tags & avatars, I design with PSP, and have been designing for over 2 1/2 years. I will be not only designing signatures, tags & avatars but will also be writing & posting tutorials as well. I will also be making some templates to share with you all as well. So I hope you enjoy and can use everything I have available on my blog :-) If you ever try any of my tutorials,please send me your completed designs and I would love to showcase it here on my blog!
View my complete profile

♥I CT For♥

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Blog Hop

avatar

♥Chat W/Me ♥

Today's Date

Favorite Stores

Photobucket

♥Forums♥

Photobucket Photobucket Photobucket Photobucket

My Pixels

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

My Time :-)

Yes I LUV My Pixels :-)

Followers

♥My Avatars♥

Some of these were made for me, others I made myself, so plz DO NOT TAKE them!! Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket